Convenient Features

MediBangPaint contains a number of convenient tools to help you paint in addition to the layer feature.

Basic canvas screen

Let’s try to remember the configuration of the basic canvas screen.

(1) Tool Menu

This contains the tools necessary to paint, such as the brush and the eraser.

(2) Sub Tool Bar

This allows you the change or set the details on the tool you selected on the tool menu.
(E.g.) Brush tool…You can set image stabilization and the ruler

(3) Shortcut Bar

This will display the tools you have added to it. It can be edited from “Main Menu” → “Settings” → “Display Shortcuts”.

(4) Main Menu

You will find the save, shortcut settings, and help menu here.

(5) Edit Menu

“Canvas Operation Menu” Explanation

(6) Selection Menu

“Canvas Operation Menu” Explanation

(7) Display Menu

“Canvas Operation Menu” Explanation

(8) Color Menu

“Color Menu” Explanation

(9) Layer Menu.

”Layer Menu” Explanation

(10) Material Menu.

”Material Menu” Explanation

(11) HSV Bar

”Color Menu” Explanation, You can display/hide the bar by tapping the arrow in the upper area.

Undo/Redo

Undo/Redo is a function that helps you when you have made an error.

(1) Undo

This will erase the operation conducted directly before it.

(2) Redo

This will erase an Undo done directly preceding it.

Color menu

This menu is to select the color of your brush.

(1) Hue Wheel

Moving the white point within the hue wheel will allow you to set your basic colors.

(2) Brightness/Saturation

Moving up and down alters “brightness (the brightness of the colors)” and moving left and right alters “saturation (the vividness of the colors)”. The higher the brighter, and the further right, the more vivid.

(3) Foreground and Background

Here you can change the foreground (on the upper left) and the background (on the lower right). You will usually be painting on the foreground. The background can be altered with the edge brush.

(4) Translucent Colors

This will make the color of your brush translucent. Tracing a colored portion of your painting will make it disappear, like when you use the eraser.

(5) RGB Settings

This will display the RBG values for the foreground. Altering the values here will also change the colors.

(6) Palette

This will let you choose a color from the pre-selected palette. You can choose from a variety of palettes, such as basic, light, and dark from the detailed menu on the upper right of your palette.

(7) Add Palette

Tapping “+” will add the color you have selected in the foreground.

(8) Delete Palette

This will delete the color you currently have selected in the palette.

HSV Bar

You can also create colors using the HSV Bar found on the left side of the canvas screen,

(1) Hue

Moving this up or down will allow you to set basic colors.

(2) Saturation

Moving up or down will adjust the saturation. The higher you set it, the more vivid the color.

(3) Brightness

Moving up or down will adjust the brightness. The higher you set it, the darker the result.

(4) Switch HSV/PAL

You can shift to the palette from the hue bar.

Bucket tool

This feature allows you to color the entirety of a selected area, or lined-off area with one touch.

Selecting the bucket icon will make the following sub-tools appear.
Play with the values to test a variety of options.

(1) Target

You can select what you would like to paint from your canvas or a layer. A selection made by canvas will paint the entirety of the object, within the lines or selected area, on all layers. A selection made by layer will only target the portion on that specific layer.

(2) Expand/Shrink

This will allow you to expand or shrink the selected area by±32 pixels. If anti-aliasing has been selected on a line image, this may result in spaces between the lines and the paint from the bucket tool. You can cover these spaces by using the expand function.

This allows you to fill in small gaps between lines and the painted area without the risk of it going out of the lines. You can selected levels from 0 (disabled) to 5.

Movement tool

The movement tool allows you to freely move the image on the layer you currently have selected.
Movement is done by dragging. By adding a check mark to “Select Layer From Tapped Location”, you can move your layers without having to select them beforehand.

Moving them with your finger

On the android version, you can change the display of the canvas with your fingers.

1. Expanding/shrinking your canvas

Use two of your fingers in a pinching in or pinching out movement to expand or shrink the canvas display.

2. Rotate canvas

Adding a check mark to the option found in “Main Menu” → “Settings” → “Rotate Canvas with Fingers”, you will be able to use two fingers to rotate the canvas. Tap with two fingers and turn them the rotate.

Select tools

MediBangPaint has a number of “Select” tools.
Using these, you can select a certain portion of your painting. We will call this portion the selected range.
Designating your selected range and then using the bucket or transform tool, you can paint or transform within the selected range.
Let’s give the variety of selection tools a try!

1 Select Tools

(1)

The shape of your selected range…There is a Lasso option that allows you to freely create your selected range free-hand, as well as options that give it square, oval, and polygon shapes. When you have selected your range, the portions that are not selected will appear a half-translucent blue.

(2)

There are off (normal)/ + (add)/ – (delete) options in the select tool. When “off”, you can select only one range, while you can selected many with “+” is selected. With “-”, you can choose one portion of your selected range and delete just that portion.

(3)

Rounded corners…This will allow you to round the corners of squared or polygonal selected ranged. You can choose from 0 (disabled) to 100%.

(4)

Delete Selection…Tapping this will delete all selected ranges.

2 Automatic Selection Tool

With the automatic selection tool, you can automatically generate a selected range in lined off areas, as well as according to the shape of colored areas.

(1) Object

You can select by either canvas or layer. Selecting canvas will generate selected ranges that apply through all layers, and selecting by layer will generate ranges on only that layer.

(2) Expand

This will shrink or expand the range by ±32 pixels.

(3) Close Gaps.

This will generate a selected range that will cove small gaps as though they are included in a lined off area. You can select levels from 0 (disabled) to 5.

(4)

Off (normal)/ + (add)/ – (delete) functions are same as those for the select tool listed above.

(5) Deselect

Tapping this will delete all selected ranges that have been generated.

3 Select Pen Tool

With the “Select Pen Tool”, you can generate selected ranges by hand, as if you are using a pen.
The area you fill in our outline with this feature will become the selected range, making it convenient for when you need to select detailed areas or complicated shapes that are difficult to capture with the shape or automatic options.

The selection portion turns red, and when you select a tool other than the brush or eraser, it will be displayed in the same way as a normal selected range.

4 Selection Eraser Tool

This tool allows you to select and delete certain portions from the selected range designated by the methods above in the same way as an eraser.

You can erase in the same way you would draw lines, making it convenient for making detailed corrections.

The ruler tool

This feature acts a guide for your lines when drawing them with the brush or similar tools.
The ruler will give you straight, accurate lines.

(1) Off.

This hides the ruler.

(2) Straight.

This will help draw a straight line at the angle of your choice. The angle can be set from “(7) Main Menu” → “Move Snap”.

(3) Cross

This will help you draw vertical and horizontal lines.

(4) Vanishing Point

Drawing two lines will set a vanishing point on them, which will help you draw toward that point.
Lines can be set from “(7) Main Menu” → “Move Snap”.

(5) Concentrated Line

This allows you to draw lines toward one central point. This point can be set from “(7) Main Menu” → “Move Snap”.

(6) Oval

This creates lines to help you draw oval shapes. Moving the white pointer will expand, shrink, and alter its shape. By dragging the red, square area above, you can alter the position of the ruler.

(7) Menu

From here, you can save the ruler you are currently using, as well as load or delete rulers. “Change Ruler Position” will allow to alter the angle and center of each ruler.

The gradation tool

This tool allows you to create gradations simply by dragging it onto the canvas.

(1) Gradation Shape “Line”

This will alter colors depending on the direction you drag it in: up, to the side, or on an angle.

(2) Gradation Shape “Circular”

This will alter colors around the point tapped. See (6)

(3) Gradation Type “Foreground – Background”

This gradation will set the start point of your drag as the foreground, and the final point as the background. See (5)

(4) Gradation Type “Foreground”

This gradation will set the starting point of your drag as the foreground, and the end point ans translucent. See (6)

The fill in tool

This feature allows you to create shapes that are colored in with the selected color by simply tapping and dragging on the canvas.

(1) Square

This will generate a square. See (6)

(2) Oval

This will generate round objects. See (7)

(3) Polygon

Selecting a starting point by tapping, and then tapping once more for each corner will generate a shape of your own design. For example, tapping three different positions will generate a triangle. See (8)

(4) Opacity

You can set the translucency or your figure from 0 to 100%. See (9)/dd>

(5) RoundCorner

You can set the roundness of the corners of your squares of polygons from 0 to 100%. See (9)

The shape brush tool

This tool will allow you to create figures with a brush.
The brush settings (color, width, etc.) are reflected in the resulting figure.

(1) Straight Line

This will draw a straight line. See (7)

(2) Bent Line.

Tapping a beginning point and then corner points (where you want it to bend), and then selecting “Confirm” will draw a bent line. See (8)

(3) Curved Line

As you did with the bent line, tap a starting point and curve points to generate a curved line. See (9)

(4) Square

This will help you draw square shapes. See (10)

(5) Oval

This will help you draw round shapes. See 11

(6) Polygon

As you did with the bent line, tap a starting point and corner points to create your polygon. See (12)

Eyedropper tool

Using the eyedropper tool allows you to pick any color you want from your image and set that color to your foreground.

You simply tap the color you would like to select.

Canvas operation menu

The follow three menus are for conducting operations for you canvas and editing figures thereon.

1 Edit Menu

The Edit Menu is for altering the conditions of your canvas and the images thereon.

(1) Copy

This allows you to copy a portion of an image designated by the select tool.

(2) Cut

This allows you to cup out a portion of an image designated by the select tool. The cut area will disappear from the canvas.

(3) Paste

This allows you paste the portion of an image designated by cut or copy onto a new layer.

(4) Rotate Canvas Left

This will rotate your canvas 90 degrees to the left.

(5) Rotate Canvas Right

This will rotate your canvas 90 degrees to the right.

(6) Flip Canvas Horizontally

This will flip your canvas horizontally.

(7) Canvas Settings

This allows you to change your canvas size and resolution. (For details, see “Canvas Settings” Tips below)

(8) Crop

This allows you to alter your canvas size to match an area selected by the select tool ,etc.

2 Select Range Menu

Here you can edit the range you have designated.
This is used for altering shapes, or drawing lines within the selected range.

(1) Select All

This will set the selected region to cover the entirety of the layer you are currently working on.

(2) Deselect

This will remove your selection over a region.

(3) Inverse Selection

This will reverse your selected and unselected regions.

(4) Select Portion

This will select all illustrations at once.

(5) Zoom In/Zoom Out

This will expand or shrink the illustrations within the selected range. This operation is completed by tapping “Confirm” after making the alterations.

(6) Free Transform

This allows you to apply transformations, such as shrinking or expanding your image regardless of aspect ratio, and flattening formations out. By adding a check mark to “Correct Perspective” will make the result more natural.

(7) Mesh Transform

This transformation allows you to distort a portion of the screen. After setting the number of partitions, you can make your transformations by dragging the pointer over cross sections of the mesh. Adding a check mark to “Interlock” for width and height, you can move entire rows with the pointer.

(8) Create Boundary

This will draw lines on the border of the selected region. You can selected between On Border, Internal, External options for the positions of the lines, and can adjust lien width between 1~128px.

3 Display Menu

This feature allows you to rotate or reverse the appearance of the screen, without altering the image’s actual direction.
Only the appearance of the canvas is altered, while the directions of the layers, etc., remains the same as before.
This is useful for times when it is difficult to draw lines with the way the canvas is facing, etc.

(1) Rotate Left

This allows you to rotate the display 10 degrees left every time you tap.

(2) Rotate Right

This allows you to rotate the display 10 degrees right every time you tap.

(3) Flip Horizontally

This will flip the display horizontally.

(4) Reset

This will return the appearance of your display to its previous state.