Let’s use transformation

In MediBang Paint, you can transform the drawing you draw later.

Expansion/Reduction/Rotation

Expansion / reduction / rotation of the most basic transform is done from «Select» → «Transform» of the menu.

During transformation, a transformation toolbar is displayed at the bottom of the main window.

Tool bar for transformation
Fig. Tool bar for transformation
POINT

You can choose transform processing from the pull-down list at the far right of the transformation tool bar.
There are three kinds of deformation processing, the image after deformation becomes beautiful as going down.

  • Nearest Neighbor (Jaggies)
  • Bilinear (Smooth)
  • Bicubic (Sharp)

Choose according to your taste.

Selection of transformation processing
Fig. Selection of transformation processing

let’s try it

First of all, download the sample and open it.

Next, select the «line(face)» layer and execute «Select» → «Transform» of the menu.

When Transform was executed
Fig. When Transform was executed

«Transform» is done by dragging «handle (1)» displayed around the image. To rotate, drag the area where the cursor on the outside of the steering wheel changes to (2).

Let’s try to enlarge the cat’s face, rotate it, and so on. When you like the deformation that you like, please press the «OK» button on the «Transform image» toolbar.

If you do not like Transformation and want to return to the state before Transformation, please press «Cancel».

Free Transform

Next, I will explain «Free Transform». Executing «Select» → «Transform» of the menu and checking «Free Transform» of the transformation tool bar makes «Free Transform» possible.

I think that «Free Transform» is easier to understand by actually manipulating it, so let’s download the sample and operate it.

let’s try it

First of all, download the sample and open it.

Next, select «cat» layer and execute «Select» → «Transform» of the menu.

Place of 'Free Transform'
Fig. Place of 'Free Transform'

Let’s check the «Free Transform» and let’s fit the image of the cat into the display.

Flow of transform
Fig. Flow of transform

Let’s change the check of «Perspective» and check the difference.

Perspective (A)unchecked / (B)checked
Fig. Perspective (A)unchecked / (B)checked

Since there is a depth in the display in this sample, it seems natural to freely deform with «Perspective» checked.

When you can deform well, please push the «OK» button on the «Transform Image» toolbar.

POINT

In accordance with the picture being drawn, let’s properly use the «Perspective» check appropriately.

Please switch on/off check of «Perspective» during deformation, please use one with less discomfort.

Mesh Transform

Using «Mesh Transform», you can distort a part of the screen.

For details click here.

let’s try it

First of all, download the sample and open it.

Let’s transform the sample «cat tea» layer mesh and put it on the picture of «can» layer.

Sample opened
Fig. Sample opened

Select the «cat tea» layer and move it from the «Select» of the menu to «Mesh Transform» and move it on the can.

Later, let’s deform it according to the shape of the can. (Check it «Vertical Link» to make it easier.)

POINT

If you can not see the can draft and it is difficult to deform, temporarily try to reduce the opacity of the «cat tea» layer, or move the «can» layer above the «cat tea» layer.

Mesh Transform flow
Fig. Mesh Transform flow
POINT

In the sample, we are daringly putting the «cat tea» layer on the «can» layer, but unless there is special circumstance, it is better to have the «can» layer (line drawing) on the «cat tea» layer (paint) It will be better.

(A)Line drawing is above / (B)Line drawing down
Fig. (A)Line drawing is above / (B)Line drawing down